ES18+MT-130 or SBH+ES18+MT-130?

Hi, first of all, congrats for the page and forum.
I'm thinking to upgrade my soundsystem what consists in:

-8x ES18 pd186 loaded and two proline 3000 to run them and crossed between
-4x Turbosound TXD 252 (1000w each box 2x15" bass reflex and a 3" for high)and two proline 3000 to run them

I'm thinking to make 4 more es18 and 4 mt-130, do you think will be a good combo? Basically i want to be sure about 4 mt-130 are enough with 12 es18.
Another doubt is how mt-130 response in indoors gigs for a little room with 100-200people.
And finally i want to know your preferences between:

12ES18+4 MT-130 or 4SBH+8ES18+MT-130

Thanks

I think 4 MT-130 can follow 12 ES18, but you will have not any headroom on the MT-130, I suggest 6 MT-130. You can use MT-130 indoor (it will be more than enough for 200 people).

If you build SBH, you will need more than 4.

Other option for infra: MTH-4654 [Vous devez être inscrit et connecté pour voir ce lien]

It can be crossed directly with MT-130 without Kick bin.

Thanks Marc

Finally we started to build mt-130 but we have problems with some dimensions. We have pdf and 3D plan and we found different dimensions between them Anyone can explain me the reason? For the moment, the only problem is the baffle hole piece and the next one. In the plan we can see 36,5cm and 35,9cm but if you draw this pieces 13,6cm from the back panel then is impossible to assemble with the sides panels. We are thinking to cut them to assemble at 13,6cm from back panel...

Is this correct?

35.9 cm is the dimension between the junction of the two boards, I built 2 MT-130 with only pdf plan and it's ok !

Yes, I know it. Tomorrow i will try to find the problem.
I'm thinking to load them with RCF drivers, and i want to know what do you think about this comp. driver:

[Vous devez être inscrit et connecté pour voir ce lien]



Thanks

CD650 is a new driver from RCF. Specs are ok , I haven't heard it, but all drivers I kwow from RCF are good.